(62 21) 82460770

Jl. Puri Cileungsi No.27, Gandoang, Kec. Cileungsi, Bogor, Jawa Barat 16820, Indonesia

©2020 by PT. Flexitech Evolusindo. 

TOPFINISH Bell 1S

SKU: Bell1S

While the RobotBell can be mounted on a robot arm, the TOPFINISH Bell 1S has been especially designed for use with reciprocators and linear axes. it is ideal for electrostatic application with water and solvent based paints and can be applied for automated liquid coating in wide range of industries where high-quality surfaces are required

 

Features and Benefits

  • Ideal coating results with super-fine atomisation
  • High variability thanks to individual adjustment of the spray jet with two shroud airs - depending on the workpiece geometry requirements, both a wide, soft spray pattern and a small, hard spray jet can be generated
  • Minimum effort for assembly & maintenance thanks to sturdy turbine technology and components made from stainless steel

 

Application

  • Wood finishing 
  • Plastic finishing
  • Drum painting 
  • Metal furniture and fixture manufacturing 
  • General metal
  • Corrosion protection
  • Metal protection and finishing
  • Aerospace industry
  • Automotive components
  • Motorcyle parts

 

Typical Fluid Handled

  • Primers, protective coatings, waterborne materials and two-part urethane
  • Wash coats, glazes, top coat lacquers and catalyzed varnishes 
  • Epoxies, urethanes, air dry enamels and clear coat enamels
  • High solid materials
  • UV paints
  • Primer and top coat
Category Data
Shaft Bearing Air bearing
Maximum Voltage 100 kV 
Nozzle Size Ø 0.8 / 1.1 / 1.4 / 1.7 mm
Bell Disc - Size 30 mm / 50 mm / 70 mm
Bell Disc - Serration smooth, straight / cross serrated
Bell Disc - Material Consistal / titanium
Material Volume 25 - 800 ml/min
Spray Jet Diameter Approx. 70 - 800 mm
Bearing Air Pressure 5.5 bar
Weight 4 kg (1 colour)
Valve Disc (Number of Colours) 1 / 2 / 4
Drive Air Pressure 0 - 8 bar
Brake Air Pressure 0 - 6 bar
Shroud Air Pressure 0.2 - 4.5 bar
Material Pressure Typically 0.5 - 2.0 bar, max. 8 bar
Material Connection G 1/4" internal
Air Connection 4 / 6 / 8 mm
Max. Material Temperature +50 °C
Ambient Temperature 0 °C to +40 °C
Temperature of Turbine Air +15 °C to +50 °C