Manual System Sprint 60L
SKU: 2355403
The Sprint 60L is used to fluidize the powder in a 60 liter stainless
steel tank. All coating parameters are set and saved using the control
unit EPG-Sprint XE . In combination with the PEM-X 1, perfect surfaces
are achieved.
Special advantages
- Corona manual gun with an air-flushed high-performance cascade. Constant and reliable coating performance.
- Fully fluidized stainless steel container. Optimal powder preparation for high quality requirements.
- Clear and user-friendly operating interface. For quickly and easily adjusting the coating parameters.
- Up to 50 coating recipes can be saved. Ideal for many color and object changes
Processable materials
- Polyester powder coatings
- Epoxy powder coatings
- Metallic powder coatings
- Acrylic powder coatings
- UDS powder coatings
- Effect powder coatings
TECHNICAL SPECIFICATION
Technical data Input voltage 85 – 250 V Input power 40 W Input frequency 50 – 60 Hz Protection class IP 64 Air inlet pressure 0,6 – 0,8 MPa, 6,0 – 8,0 bar, 87 – 116 PSI Air inlet connection G 1/4‘‘ i Exhaust air flow 0,05 – 20,0 Nm³/h Operating temperature 5 – 45 °C, 41.0 – 113.0 °F
PRODUCT INFO
Included:
- Corona manual gun PEM-X1
- Control device EPG-Sprint XE
- Injector PI-F1
- Suction lance with fluid cap
- Device cart
- Powder hose 5m (Ø 11mm)
- Mains cable 3m
- Grounding cable 10m
- Connection hose
- Stainless steel containers